The MA9071 electrolyte fill solution is designed for Milwaukee's polarographic dissolved oxygen probe
Warning: Last items in stock!
The MA9071 electrolyte fill solution is designed for Milwaukee's polarographic dissolved oxygen probe. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe.
Factory mixed using reagent grade chemicals in a dedicated, temperature controlled environment.
Product labeled with product code, lot number and expiration date.
Air tight bottle with tamper-proof seal.
1. Remove the membrane
Take the membrane off the end of the probe and dry the diode off.
2. Zero out the display
Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.
3. Fill the membrane
Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)
4. Attach the membrane
Screw the membrane on to the probe.
No customer reviews for the moment.
CAD$62.99 -10% CAD$69.99
CAD$16.19 -10% CAD$17.99
CAD$28.76 -10% CAD$31.95
CAD$27.89 -10% CAD$30.99
CAD$22.49 -10% CAD$24.99
CAD$49.49 -10% CAD$54.99
CAD$89.99 -10% CAD$99.99